Construction Workers

Rely on i80Equipment.com for Your Reconditioned Truck

I 80 Equipment
is one of the well-known new & used truck seller. They have been in this
business for last 17 years. Their experience with bucket trucks, used bucket trucks, has
fostered the goodwill they have earned from their satisfied buyers. I 80
Equipment have extensive experience in the field of reconditioning process of
the trucks. Their step-by-step process and quality maintaining procedure helps
potential buyers take their decisions easily.

I 80 Equipment have an
experienced and knowledgeable mechanical & technical team who manage the
7-step reconditioning procedure. The process includes the following steps:

1. Step One -
   Disassembly: Each bucket truck, Digger Derrick or crane is completely
   disassembled. By cutting all the extra boxes make it flatbed.
2. Step Two � Degrease/Power
   wash: Each bucket
   Truck, Digger Derrick or crane is completely soaked in degreaser. After
   the degreaser has set and loosed the grease and debris the unit is
   completely power washed. This step is 
   important for the next steps.
3. Step Three � Body
   bay: Each bucket
   truck, Digger Derrick or Crane is completely sanded down to factory
   primer. All dents are pulled. All problem areas the metal will be replaced
   with new metal. Before the unit goes into the paint bay, the whole truck
   will be premiered and sanded down with 320 grit sandpaper.
4. Step Four � Paint
   bay: In this
   bay, two steps are performed. Step One: Each Bucket Truck, Digger Derrick
   or Crane will be prepped in the paint bay. All steel boxes and chassis
   will be sprayed with Colar epoxy primer to give the boxes and chassis more
   protection. The topcoat will be sprayed with 2.8 industrial emron paint.
   The paint will be heat treated to 100 degrees. Step Two: Bed Liners. Each
   Bucket Truck, Digger Derrick or Crane will have Linex sprayed on the bed
   and walkways. This product will be sprayed a 100 mills thick to give your
   bed a great coat of protection. This product is sprayed with a 120 gallon
   Linex machine. With this machine I 80 Equipment will back each bed liner
   with a warranty.
5. Step Five �
   Assembly bay: Each bucket truck, Digger Derrick or Crane
   will be reassembled in this bay. All broken parts will be replacing with
   new. The trucks will be sprayed all over and dirt will be taken off the
   windows and thus cleaned. The inside of the cab will be cleaned for
   presentation. The cab and boxes will be doffed out and waxed with hand
   glaze.
6. Step Six �
   Mechanics bay: All Mechanics will be checked with a 77 point inspection PM
   Checklist as follows: Engine, Power Tran, Steering suspension, Brakes,
   Electrical system, Cab and body, Tires wheels and rims. Each category will
   meet or exceed federal inspections. After mechanic signs off, the unit
   will go to an outside source to get federally inspected and certified.
7. Step 7 � Finished Product

Goodwill,
satisfied customer base, experience and marinating the quality help I 80 Equipment
make people rely on their reconditioning process to get the high performance
reconditioned truck. Digger Derricks,Used Digger Derricks, Forestry Trucks,Bucket Trucks